Olympic Lifts Don’t Optimize Explosive Power

Paradigm shift. Noun: A fundamental change in approach or underlying assumptions.

Before I start, it’s imperative to understand power.  Power is the product of strength and speed [18].  Generating high power outputs is one of the most important qualities an athlete can possess [8, 15, 18] as it largely determines explosive athletic performance [21].  For this reason, higher power athletes are more successful [1, 2, 3].

Growing up, I never did cleans, snatches, or jerks (the Olympic lifts).  I followed a paradigm that didn’t need them:

Sprints and jumps optimize explosive power.

Then, during grad school, I took the USA-Weightlifting certification.  There I was presented with a new paradigm:

Olympic lifts optimizes explosive power.

Twenty-five years ago, the researcher, John Garhammer showed that 100-kg Powerlifters produced 1,100 Watts of power in a maximal Deadlift and Back Squat.

Olympic Weightlifters of the same weight produced 2,950 Watts in a maximal Snatch and Clean, and 5,500 W in the 2nd pull of the Snatch and Clean [13, 14].

These power differences are huge.

I bought into this research and shifted paradigms.

I started cleaning and snatching once per week as well as teaching my athletes to hang clean.

Soon after, I started an internship at the University of Minnesota under Cal Dietz.

Over the span of three months, I saw a total of one Olympic lift performed in his weight room.

Cal is known for building explosive power in athletes, but he didn’t use Olympic lifts.

This time my paradigm was no longer a statement, but a question:

Do Olympic lifts actually optimize explosive power?

Jumping Produces More Power than Olympic Lifts

The best way to train for power is to perform exercises that produce the most power (measured in Watts) [10, 30].

Revisiting Garhammer’s work, the maximal Clean and Snatch produce around 3,000 Watts, and the 2nd pulls (when the bar is near the hips) in these movements produce 5,500 W.

Compared to vertical jumping, people who jumped 19-25.5 inches produced peak power at 5,377, 5,378, 5,438, and 5,782 Watts [11, 12, 16, 20].

In another study, college weightlifters jumped 25.6 inches and produced 6,931 Watts [17].

Because mid-20 inch vertical jumps are terrible, I tested my own.  Weighing 100-kg, I did a 32-inch standing countermovement jump (in the middle of a hypertrophy phase).  My peak power based on an equation by Sayers, et al. [23] came out to 7,409 Watts.

Looks like jumping fairs better than Olympic lifting in peak power production.

These comparisons are telling, but there are a few issues:

1) Olympic lifts produce peak power at loads of 70-80%, not at 100% (such as those studied by Garhammer).

2) The power or hang versions of the lifts are more popular among athletes as they are easier to perform and produce more power.  (Garhammer studied full cleans and snatches).

3) Olympic Weightlifters have greater technical proficiency in the lifts than the typical athlete, meaning they produce more power.

4) The same group of athletes should perform an Olympic lift and vertical jump to compare the two directly.

All of these concerns are covered in these three studies:

Study #1:  In a group of college weightlifters who had weightlifted for at least 2 years, a mid thigh pull (clean pull) produced peak power at 2,204 Watts on average.  In a bodyweight vertical jump, they averaged 6,931 W [17].

Study #2:  In a Power Clean, a group of athletes produced peak power at 4,787 Watts on average. When these same athletes do a bodyweight vertical jump, they averaged 6,437 W [5].

Study #3:  In university football and volleyball players who had routinely cleaned for 2+ years, a hang clean produced peak power at 3,532 Watts and a vertical jump produced peak power at 4,384 W [19].

To repeat: The best way to train for power is to perform exercises that produce the most power [10, 30].

Vertical jumps produce the most power [22].  Olympic lifts do not.

Improving Jumps: The Trap Bar

There are not only exercises that maximize power, but loads within these exercises that maximize power.  Finding this load will optimize athletic performance gains [30].

For example, a heavy deadlift can produce 1,100 Watts [13] compared to a light deadlift that can produce 4,388 W [27] (these in similar level Powerlifters).

And if the barbell is swapped for a trap bar, power can get up to 4,872 W [27].

Both changing exercises and changing load can increase or decrease power.

Since this is known, will adding weight to vertical jumps increase its power output?

The barbell jump squat is most commonly used as it produces significant amounts of power [25].

In one study, the barbell squat jump produced 4,091 Watts and bodyweight vertical jumps produced 4,324 W [28].

Adding weight decreased power output.


In that same study, the trap bar jump beat out both exercises with 4,606 Watts [28].

Weighted jumps should be done at arms’ length (trap bar) instead of on the shoulder (barbell), and with ~20% 1RM load.

This altered position and light load increases power output among all jumps [28], leading to further improvements in power [30].

How to Maximize Power

If you are weak, get stronger first.  Increasing strength will make you more powerful [6, 21, 26].  Power gains are compromised in weaker athletes [15, 9, 7].

As for training power directly, pick up a trap bar and jump with it.

This improves sprinting [24, 29] and jumping [29] performance.  Do both vertical jumps and trap bar jumps to cover different velocities [9], sprint, sprint with weight, and throw heavy and light med balls.

Combine the two: power training and heavy strength training for a synergistic effect [4, 9].

As for my paradigm, I’m back where I started:

Sprints and jumps optimize explosive power.

Limitations:  This article addressed Olympic lifts for power development.  There are other benefits to performing them (flexibility, triple extension, force absorption, rate of force production, etc.).  With a good coach and years of time and energy, the Olympic lifts can be useful exercises, even for power gains.  The best?  Probably not.

If they don’t make you as strong as a back squat or as powerful as a trap bar jump, then ask yourself:  Are Olympic lifts really optimizing my power training?

When your goal is to sprint faster, hit harder, and jump higher, maybe you should think twice about Olympic lifting.

Share this on Facebook & Join the Conversation

A couple months ago I reached out to Jake because I was having trouble finding the right workout for myself.  I didn’t know what to do, I loved to be in the weight room but nothing was transferring over to the ball field for me.  Whenever I did think the workout was good, I would end up with injuries after.  This semester Jake showed me cluster training and I have seen pretty great results with my strength and power.  Three cluster lifts that have been really beneficial for me are the squats, dumbbell bench, and incline dumbbell bench.  I have seen more mass on myself, and I have been throwing the baseball a couple mph faster this year.  Most importantly, I have been injury free while doing a cluster workout every day for the week.

Brady S. - Division III Baseball Player

[1] Baker, D. (2001). Comparison of upper-body strength and power between professional and college-aged rugby league players. Journal of Strength and Conditioning Research, 15(1), 30-5.

[2] Baker, D. (2002). Differences in strength and power among junior-high, senior-high, college-aged, and elite professional rugby league players. Journal of Strength and Conditioning Research, 16(4), 581-5.

[3] Baker, D. G. & Newton, R. U. (2006). Discriminative analyses of various upper body tests in professional rugby-league players. International Journal of Sports Physiology and Performance, 1(4), 347-60.

[4] Cormie, P., McCaulley, G. O., & McBride, J. M. (2007). Power versus strength-power jump squat training: influence on the load-power relationship. Medicine and Science in Sports and Exercise, 39(6), 996-1003.

[5] Cormie, P., McCaulley, G. O., Triplett, N. T., & McBride, J. M. (2007). Optimal loading for maximal power output during lower-body resistance exercises. Medicine and Science in Sports and Exercise, 39(2), 340-9.

[6] Cormie, P., McGuigan, M. R., & Newton, R. U. (2010). Adaptations in athletic performance after ballistic power versus strength training. Medicine and Science in Sports and Exercise, 42(8), 1582-98.

[7] Cormie, P., McGuigan, M. R., & Newton, R. U. (2010). Influence of strength on magnitude and mechanisms of adaptation to power training. Medicine and Science in Sports and Exercise, 42(8), 1566-81.

[8] Cormie, P., McGuigan, M. R., & Newton, R. U. (2011). Developing maximal neuromuscular power: Part 1—biological basis of maximal power production. Sports Medicine (Auckland, N. Z.), 41(1), 17-38.

[9] Cormie, P., McGuigan, M. R., & Newton, R. U. (2011). Developing maximal neuromuscular power: part 2 – training considerations for improving maximal power production. Sports Medicine (Auckland, N.Z.), 41(2), 125-46.

[10] Cronin, J. & Sleivert, G. (2005). Challenges in understanding the influence of maximal power training on improving athletic performance. Sports Medicine (Auckland, N.Z.), 35(3), 213-34.

[11] Fry, A. C., Schilling, B. K., Staron, R. S., Hagerman, F. C., Hikida, R. S., Thrust, J. T. (2003). Muscle fiber characteristics and performance correlates of male Olympic-style weightlifters. Journal of Strength and Conditioning Research, 17(4), 746-54.

[12] Fry, A. C., Webber, J. M., Weiss, L. W., Harber, M. P., Vaczi, M., & Pattison, N. A. (2003). Muscle fiber characteristics of competitive power lifters. Journal of Strength and Conditioning Research, 17(2), 402-410.

[13] Garhammer, J. (1980). Power production by Olympic weightlifters. Medicine and Science in Sports and Exercise, 12(1), 54-60.

[14] Garhammer, J. (1991). A comparison of maximal power outputs between elite male and female weightlifters in competition. International Journal of Sport Biomechanics, 7, 3-11.

[15] Haff, G. G. & Stone, M. H. (2015). Methods of developing power with special reference to football players. Strength and Conditioning Journal, 37(6), 2-16.

[16] Johnson, D. L., Bahamonde, R. (1996). Power output estimate in university athletes. Journal of Strength and Conditioning Research, 10(3), 161-6.

[17] Kawamori, N., Rossi, S. J., Justice, B. D., Haff, E. E., Pistilli, E. E., O’Bryant, H. S., Stone, M. H., & Haff, G. G. (2006). Peak force and rate of force development during isometric and dynamic mid-thigh clean pulls performed at various intensities. Journal of Strength and Conditioning Research, 20(3), 483-91.

[18] Kraemer, W. J. & Newton, R. U. (2000). Training for muscular power. Physical Medicine and Rehabilitation Clinics of North America, 11(2), 341-68.

[19] MacKenzie, S. J., Lavers, R. J., & Wallace, B. B. (2014). A biomechanical comparison of the vertical jump, power clean, and jump squat. Journal of Sports Science, 32(16), 1576-85.

[20] McBride, J. M., McBride-Triplett, T., Davie, A., & Newton, R. U. (1999). A comparison of strength and power characteristics between power lifters, Olympic lifters, and sprinters. Journal of Strength and Conditioning Research, 13(1), 58-66.

[21] Newton, R. U. & Kraemer, W. J. (1994). Developing explosive muscular power: Implications for a mixed methods training strategy. Strength and Conditioning, 16(5), 20-31.

[22] Pazin, N., Berjan, B., Nedeljkovic, A., Markovic, G., & Jaric, S. (2013). Power output in vertical jumps: does optimum loading depend on activity profiles? European Journal of Applied Physiology, 113(3), 577-89.

[23] Sayers, S. P., Harackiewicz, D. V., Harman, E. A., Frykman, P. N., & Rosenstein, M. T. (1999). Cross-validation of three jump power equations. Medicine and Science in Sports and Exercise, 31(4), 572-7.

[24] Sleivert, G. & Taingahue, M. (2004). The relationship between maximal jump-squat power and sprint acceleration in athletes. European Journal of Applied Physiology, 91(1), 46-52.

[25] Stone, M. H., O’Bryant, H. S., McCoy, L., Coglianese, R., Lehmukl, M., & Schilling, B. (2003). Power and maximum strength relationships during performance of dynamic and static weighted jumps. Journal of Strength and Conditioning Research, 17(1), 140-7.

[26] Stone, M. H., Sanborn, K., O’Bryant, H. S., Hartman, M., Stone, M. E., Proulx, C., Ward, B., & Hruby, J. (2003). Maximum strength-power-performance relationships in collegiate throwers. Journal of Strength and Conditioning Research, 17(4), 739-45.

[27] Swinton, P. A., Stewart, A., Agouris, I., Keough, J. W., Lloyd, R. (2011). A biomechanical analysis of straight and hexagonal barbell deadlifts using submaximal loads. Journal of Strength and Conditioning Research, 25(7), 2000-9.

[28] Swinton, P. A., Stewart, A. D., Lloyd, R., Agouris, I., & Keogh, J. W. (2012). Effect of load positioning on the kinematics and kinetics of weighted vertical jumps. Journal of Strength and Conditioning Research, 26(4), 906-13.

[29] Turner, T. S., Tobin, D. P., & Delahunt, E. (2015). Peak power in the hexagonal barbell jump squat and its relationship to jump performance and acceleration in elite rugby union players. Journal of Strength and Conditioning Research, 29(5), 1234-9.

[30] Wilson, G. J., Newton, R. U., Murphy, A. J., & Humphries, B. J. (1993). The optimal training load for the development of dynamic athletic performance. Medicine and Science in Sports and Exercise, 25(11), 1279-86.